Mold and fungi need to grow in a home with organic materials to feed themselves. In houses, there is always a lot of organic materials where mold can live, such as wood, drywall, and other building materials.
Humidity, on the other hand, is practically easy to control and keep out of the interior of your home. The best way to prevent the growth of fungi is to control it under the house because it is the place where there is more moisture and where it expands faster.
WALLS WITH MOLD: SOLUTIONS
CONTROL MOLD BY PREVENTING MOISTURE
Most fungi need 24-48 hours of moisture to start growing. Therefore, if a suitable material for the fungus in your house is wet for more than 24 hours, then there is a risk that the mold will start to grow. Click on this link mold removal Palm Desert.
LET’S AVOID THE FUNGUS BY PREVENTING WATER LEAKS
There are a few main things that usually cause moisture problems in the home. One of them is water leaks. These include leaks in the ceiling or walls, leaking pipes, and faucets that leak or a leak in the shower.
If you know of some leaks in your home you should correct them without delay. It may be necessary to inspect your home to find any water leak you do not know.
ERADICATE MOLD BY PREVENTING CONDENSATION
Condensation is another frequent cause of moisture. Condensation occurs on cold surfaces when the water vapor in the air cools and becomes liquid. You will often see condensation on metal pipes, concrete walls, water tanks, and windows.
One way to reduce condensation is to keep the temperature warmer in the rooms. For example, by installing insulation. You can also isolate the surfaces themselves as you place coatings on metal pipes. You will also have less condensation if you keep the humidity low in your home.
AVOID MOLD BY REDUCING MOISTURE
Many species of fungi can start to grow out of moisture if only the moisture stays high for long enough. In fact, the humidity only has to be greater than 55% before some fungi begin to grow.
The best way to keep humidity low in your home is through ventilation. Opening the windows during the day, especially when it’s hot is very good since that’s when the humidity usually moves outside.
It is especially important to ventilate rooms where steam and humidity accumulate, such as the kitchen and bathroom. Air extractors help reduce humidity by doing things like cooking or washing dishes.
Air conditioners can also reduce the humidity of the house, as you can also use dehumidifiers in your home.
HOW TO PREVENT MOLD IN WET CLOTHES
A common cause of moisture problems in homes is wet clothes. After washing clothes, it should be dried immediately. Do not leave in a wet pile for a long time. Be sure not to leave any wet clothes lying around waiting to be washed. Be sure to remove molds on clothing, if you have them.
It is better to dry clothes outdoors on a clothing string if possible. If they dry in a clothes dryer inside your house, then you should expel the air outside the house if possible. In either case make sure that the room in which you are drying your clothes is well ventilated.
ERADICATE FUNGI AND MOLD FROM YOUR HOME
Once the mold has started to grow in your home, it is not enough to remove the source of moisture from the mold. Fungi that run out of moisture can remain dormant for a long time without dying. So, if you already have a mushroom presence in your home, you have to take steps to eradicate all the presence of mold and mildew in your home.
KILL THE MOLD
RUST AND CLEANING POWER SUPPLIES TO AVOID MOLD
Mold grows and feeds on organic substances such as wood or cotton. Mold should not grow on surfaces such as plastic, metal or glass unless there is a layer of grease or some other organic substance that can be fed.
Some types of mushrooms are conditioned to existing materials in the home and these include: wood, carpets, food, paper, insulation, wallpaper, paint, wallpaper glue, plaster, fabrics, cotton, books, leather, chipboard, furniture, dust, roof tiles, inside air conditioning and almost any other organic material.
It should be cleaned regularly to reduce dirt and grime, where mold can live. Aspirate the dust often, ideally with a HEPA filter (High-Efficiency Particulate Air) vacuum cleaner is filtered to remove dust and other substances where mold can grow. It has been found that 80% of mold grows in powder.
MINIMIZATION OF FUNGAL SPORES TO AVOID MOLD
Mold spores are everywhere in the outside air. They float through buildings all the time and there is no practical way to eliminate all the fungal spores inside.
However, if the concentration of mold spores inside is significantly higher than outside, then it may begin to cause health problems. A greater amount of mold spores also increases the possibility of problems.
Mold spores enter homes through windows, doors, air ducts, etc. They can also be transported indoors attached to your skin, clothing, hair, pets, etc.
Although you can not eliminate all mold spores in the air inside your home or prevent all mold spores from occurring, minimizing the number of spores will prevent you from suffering mold-related health problems and decrease the possibility of mold spores. Mold begins to grow in your home.
To minimize mold spores clean the dust often. Also empty your home regularly, preferably with a HEPA filter vacuum to remove mold spores. HEPA air filters in your home also help eliminate mold spores from the air.
SUNLIGHT TO AVOID MOLD
Mold loves dark interior spaces to grow. Allowing sunlight to enter will reduce the chances of mold growth so opening the curtains in the rooms during the day will cause natural light to enter.
HEAT AND PREVENTION OF FUNGI
Mold generally does not grow in cold environments. Warm and humid conditions are ideal for mold growth. Most mushrooms need a temperature of 70 degrees Fahrenheit (20 degrees Celsius) or more to grow.
Air conditioners to regulate the temperature of your home can help prevent the growth of mold.