One of the most distressing problems for a home or business owner can be facing a water leak. Plumbing problems usually occur in the drain pipe or drain, or close to groundwater.
It can also happen to any person and any type of structure. You cannot always know what type of leak you have, you may notice some unusual problems but you will not realize that you have a serious problem until it happens. Some of the signs that there may be a leak are:
- Hotspot on the ground
- Sound of running water when accessories such as WC are not being used
- Water from somewhere on the ground
- Water from a point under the wall
- Hot water from a cold water tap
- Water heater that does not turn off
Leakage of water under a slab occurs when a water pipe has failed under a foundation slab. They can be caused by incompatible soil that contains one thing that causes a negative chemical change once it comes into contact with copper pipes (this is termed electrolysis). Please visit this link.
It can happen at any time, even years after installation. Unfortunately, this is the most common cause of water leakage under the slab and requires a total replacement of all copper water pipes.
Another cause is when the pipe is exposed and comes into contact with unprotected lines such as rebar pipes, electrical conduits or heating ducts. Friction causes the pipe to wear out and leaks appear. Another cause of a leak under the slab is a bend line or in other words, which has been accidentally damaged by a particular worker or another contractor. The indentation or bleeding disappears over time and causes a leak.
There are many methods of detecting water leaks, from electronic methods to using sewer chambers or hammering the area and doing a visual check, etc with electronic leak detection, the pipes must be disconnected and pressurized with nitrogen that emits a sound Sharp that is heard through high-power headphones. The highest point of sound in decibels is typically the source of the leak. This is a very effective way to detect leaks.
Obviously, the detection of leaks of pipes of any kind, it is necessary to repair them and replace the pipes. If you suspect that you may have a leak in your home or business, call a plumber immediately before it is too late.
How to find a water leak and where to look
If you suspect that you have a water leak, you do not need to call someone immediately. Often, you can find a leak in your own home without having to call a professional. The following is a list of places to look in your home before calling a plumber. Leaks can represent 20% or more of your water bill. Conserve water and save money by regularly checking for leaks in your home.
Water leakage in the kitchen? Search in:
- Dishwasher: Check for leaks under the sink where the water supply hose is connected. Look around the bottom of the dishwasher to see if there is evidence of water leaks, such as discolored floor or cabinet, or soft water damaged.
- Refrigerator: If your refrigerator or freezer incorporates an ice machine, make sure that the hose connection is properly connected to the water supply line.
- Sink: Replace worn putty or silicone around sinks and check that pipes and fittings under the sink do not leak. A slow drain pipe may indicate a partially blocked leak that needs cleaning.
Water leakage in the bathroom? Search in:
- Showers and bathtubs: Remove and replace old, worn or cracked putty and grout. Water can seep through damaged joints, causing spots or soft areas around nearby walls and floors.
- Sinks: Check under the sink for leaks in water supply lines or drains.
- Toilets: Traffic jams can be caused by too much toilet paper or objects such as deodorants that hang from the toilet bowl. In addition, some cleaning products such as chlorine tablets can corrode the internal plastic or rubber parts, causing a leak. Leaks can also occur at the base of the toilet, where a wax ring seals the toilet to the sewer pipe.
Water leaks in the basement, laundry room or storage room? Search in:
- Washer: Check hoses regularly to check for cracks, wear and leaks around the ends of the hose. Replace the hose if you encounter a problem or every three to five years as part of a proactive maintenance program. To help ensure that the hose does not twist, leave at least 10 cm between the water connection and the back of the washer. If you can not find the water leak, keep in mind that the washing machine can only lose water if it has been running recently.
- Water heater: Most water heaters last between eight and 15 years. Moisture spots on the ground or in an oxidized tank can signal a leak.