How to prevent mold in the home?

How to prevent mold

Mold and fungi need to grow in a home with organic materials to feed themselves. In houses, there is always a lot of organic materials where mold can live, such as wood, drywall, and other building materials.

Humidity, on the other hand, is practically easy to control and keep out of the interior of your home. The best way to prevent the growth of fungi is to control it under the house because it is the place where there is more moisture and where it expands faster.




Most fungi need 24-48 hours of moisture to start growing. Therefore, if a suitable material for the fungus in your house is wet for more than 24 hours, then there is a risk that the mold will start to grow. Click on this link mold removal Palm Desert.


There are a few main things that usually cause moisture problems in the home. One of them is water leaks. These include leaks in the ceiling or walls, leaking pipes, and faucets that leak or a leak in the shower.

If you know of some leaks in your home you should correct them without delay. It may be necessary to inspect your home to find any water leak you do not know.


Condensation is another frequent cause of moisture. Condensation occurs on cold surfaces when the water vapor in the air cools and becomes liquid. You will often see condensation on metal pipes, concrete walls, water tanks, and windows.

One way to reduce condensation is to keep the temperature warmer in the rooms. For example, by installing insulation. You can also isolate the surfaces themselves as you place coatings on metal pipes. You will also have less condensation if you keep the humidity low in your home.


Many species of fungi can start to grow out of moisture if only the moisture stays high for long enough. In fact, the humidity only has to be greater than 55% before some fungi begin to grow.

The best way to keep humidity low in your home is through ventilation. Opening the windows during the day, especially when it’s hot is very good since that’s when the humidity usually moves outside.

It is especially important to ventilate rooms where steam and humidity accumulate, such as the kitchen and bathroom. Air extractors help reduce humidity by doing things like cooking or washing dishes.

Air conditioners can also reduce the humidity of the house, as you can also use dehumidifiers in your home.


A common cause of moisture problems in homes is wet clothes. After washing clothes, it should be dried immediately. Do not leave in a wet pile for a long time. Be sure not to leave any wet clothes lying around waiting to be washed. Be sure to remove molds on clothing, if you have them.

It is better to dry clothes outdoors on a clothing string if possible. If they dry in a clothes dryer inside your house, then you should expel the air outside the house if possible. In either case make sure that the room in which you are drying your clothes is well ventilated.


Mold Removal

Once the mold has started to grow in your home, it is not enough to remove the source of moisture from the mold. Fungi that run out of moisture can remain dormant for a long time without dying. So, if you already have a mushroom presence in your home, you have to take steps to eradicate all the presence of mold and mildew in your home.



Mold grows and feeds on organic substances such as wood or cotton. Mold should not grow on surfaces such as plastic, metal or glass unless there is a layer of grease or some other organic substance that can be fed.

Some types of mushrooms are conditioned to existing materials in the home and these include: wood, carpets, food, paper, insulation, wallpaper, paint, wallpaper glue, plaster, fabrics, cotton, books, leather, chipboard, furniture, dust, roof tiles, inside air conditioning and almost any other organic material.

It should be cleaned regularly to reduce dirt and grime, where mold can live. Aspirate the dust often, ideally with a HEPA filter (High-Efficiency Particulate Air) vacuum cleaner is filtered to remove dust and other substances where mold can grow. It has been found that 80% of mold grows in powder.


Mold spores are everywhere in the outside air. They float through buildings all the time and there is no practical way to eliminate all the fungal spores inside.

However, if the concentration of mold spores inside is significantly higher than outside, then it may begin to cause health problems. A greater amount of mold spores also increases the possibility of problems.

Mold spores enter homes through windows, doors, air ducts, etc. They can also be transported indoors attached to your skin, clothing, hair, pets, etc.

Although you can not eliminate all mold spores in the air inside your home or prevent all mold spores from occurring, minimizing the number of spores will prevent you from suffering mold-related health problems and decrease the possibility of mold spores. Mold begins to grow in your home.

To minimize mold spores clean the dust often. Also empty your home regularly, preferably with a HEPA filter vacuum to remove mold spores. HEPA air filters in your home also help eliminate mold spores from the air.


Mold loves dark interior spaces to grow. Allowing sunlight to enter will reduce the chances of mold growth so opening the curtains in the rooms during the day will cause natural light to enter.


Mold generally does not grow in cold environments. Warm and humid conditions are ideal for mold growth. Most mushrooms need a temperature of 70 degrees Fahrenheit (20 degrees Celsius) or more to grow.

Air conditioners to regulate the temperature of your home can help prevent the growth of mold.

How to repair leaks? – Leak Detection

Leak detection


One of the most distressing problems for a home or business owner can be facing a water leak. Plumbing problems usually occur in the drain pipe or drain, or close to groundwater.

 repair leaks

It can also happen to any person and any type of structure. You cannot always know what type of leak you have, you may notice some unusual problems but you will not realize that you have a serious problem until it happens. Some of the signs that there may be a leak are:

  • Hotspot on the ground
  • Sound of running water when accessories such as WC are not being used
  • Water from somewhere on the ground
  • Water from a point under the wall
  • Hot water from a cold water tap
  • Water heater that does not turn off

Leakage of water under a slab occurs when a water pipe has failed under a foundation slab. They can be caused by incompatible soil that contains one thing that causes a negative chemical change once it comes into contact with copper pipes (this is termed electrolysis). Please visit this link.

It can happen at any time, even years after installation. Unfortunately, this is the most common cause of water leakage under the slab and requires a total replacement of all copper water pipes.

Another cause is when the pipe is exposed and comes into contact with unprotected lines such as rebar pipes, electrical conduits or heating ducts. Friction causes the pipe to wear out and leaks appear. Another cause of a leak under the slab is a bend line or in other words, which has been accidentally damaged by a particular worker or another contractor. The indentation or bleeding disappears over time and causes a leak.

There are many methods of detecting water leaks, from electronic methods to using sewer chambers or hammering the area and doing a visual check, etc with electronic leak detection, the pipes must be disconnected and pressurized with nitrogen that emits a sound Sharp that is heard through high-power headphones. The highest point of sound in decibels is typically the source of the leak. This is a very effective way to detect leaks.

Obviously, the detection of leaks of pipes of any kind, it is necessary to repair them and replace the pipes. If you suspect that you may have a leak in your home or business, call a plumber immediately before it is too late.

How to find a water leak and where to look

If you suspect that you have a water leak, you do not need to call someone immediately. Often, you can find a leak in your own home without having to call a professional. The following is a list of places to look in your home before calling a plumber. Leaks can represent 20% or more of your water bill. Conserve water and save money by regularly checking for leaks in your home.

Water leakage in the kitchen? Search in:

  • Dishwasher: Check for leaks under the sink where the water supply hose is connected. Look around the bottom of the dishwasher to see if there is evidence of water leaks, such as discolored floor or cabinet, or soft water damaged.
  • Refrigerator: If your refrigerator or freezer incorporates an ice machine, make sure that the hose connection is properly connected to the water supply line.
  • Sink: Replace worn putty or silicone around sinks and check that pipes and fittings under the sink do not leak. A slow drain pipe may indicate a partially blocked leak that needs cleaning.

Water leakage in the bathroom? Search in:

  • Showers and bathtubs: Remove and replace old, worn or cracked putty and grout. Water can seep through damaged joints, causing spots or soft areas around nearby walls and floors.
  • Sinks: Check under the sink for leaks in water supply lines or drains.
  • Toilets: Traffic jams can be caused by too much toilet paper or objects such as deodorants that hang from the toilet bowl. In addition, some cleaning products such as chlorine tablets can corrode the internal plastic or rubber parts, causing a leak. Leaks can also occur at the base of the toilet, where a wax ring seals the toilet to the sewer pipe.

Water leaks in the basement, laundry room or storage room? Search in:

  • Washer: Check hoses regularly to check for cracks, wear and leaks around the ends of the hose. Replace the hose if you encounter a problem or every three to five years as part of a proactive maintenance program. To help ensure that the hose does not twist, leave at least 10 cm between the water connection and the back of the washer. If you can not find the water leak, keep in mind that the washing machine can only lose water if it has been running recently.
  • Water heater: Most water heaters last between eight and 15 years. Moisture spots on the ground or in an oxidized tank can signal a leak.

Leak Detective – Ultrasonic Air and Water Leak Detector System